When it comes to building your home, the concrete foundation is to be considered the most important aspect. Sure, the aesthetics of any home are important, but without a good concrete foundation, you’ll end up with cracks in your sheet rock, cracks in your brick and future problems that could cost thousands of dollars!

At Harmon Concrete, we’ve literally installed hundreds of concrete foundations in Northwest Arkansas and beyond! When it comes to our concrete foundations, there are no shortcuts!

Here are the steps we take for our concrete foundations:

The home or garage slab is marked perfectly square. The footing is dug according to specifications. Usually 18″ – 24″ wide and 18″ deep. We then place rebar in the footing with rebar chairs to hold the rebar off the ground. The rebar is placed in the footing according to code, whether we need an inspection or not. All footings are installed using the latest laser technology. The footing is poured.

The footing, once it becomes hard, gets marked square to prepare for the blocks or wall. The wall/blocks are put into place (If using

blocks, they get filled with concrete). High quality gravel is used under the slab. The gravel gets compacted several times to make sure there aren’t any hollow pockets.

Vapor barrier is used (ALWAYS!) on top of the gravel. Wire mesh or rebar is put into place. If required, we call for an inspection. The concrete slab is poured and finished to perfection!

Give the professionals at Harmon Concrete a call when you decide to build your next concrete foundation in or around Northwest Arkansas. As always, we give free estimates and are happy to meet with you around your schedule.