Call Us Toll-Free: 1-800-680-6395

Fiber Mesh And Concrete

Does Fibermesh fiber reinforced concrete require curing?

The use of Fibermesh fiber reinforcement does not alter the need for good concreting practices. Curing is one of the critical steps in the placement of quality concrete. Fibermesh fibers have no effect on the type of curing employed, for Fibermesh fibers are chemically inert and have no chemical or mechanical effect on the curing method of choice.

Read more

Does the use of Fibermesh fibers require mix design changes?

Fibermesh fiber reinforcement is a mechanical anchoring process. At standard volumes and application rates, no mix design changes should be necessary. However, when application rates are radically increased, some alterations in the mix design may be necessary to ensure appropriate rheology.

Read more

Is there a benefit of increased fibermesh dosage rate?

Is there a benefit of increased fibermesh dosage rate?

Prior to using Fibermesh fibers in concrete, the user must decide what the fibers are being used for. The purchaser must decide what benefits are required for the project and formulate an informed conclusion on any deviations based on statistically accurate field and laboratory test results for deviation from the industry standard application rate. As an example, an increase

Read more

What are recommended mix proportions for good concrete?

Good concrete can be obtained by using a wide variety of mix proportions if proper mix design procedures are used. A good general rule to use is the rule of 6’s: [list style=”arrow” color=”blue”] A minimum cement content of 6 bags per cubic yard of concrete (3,000 PSI), A maximum water content of 6 gallons

Read more

Is There A Standard Application Rate For Fibermesh Fiber Reinforced Concrete?

As with other concrete constituents and reinforcement, Fibermesh fibers’ standard application rate is based on a percent by volume. Fibermesh synthetic fibers’ most proven and typical application rate is one tenth of one percent by volume (or 1 pound per cubic yard). Novomesh e3 is used at the standard application rate of (1) 24lb bag per cubic

Read more
Page 1 of 212

Serving The Central United States Since 1987

Harmon Concrete proudly services Tulsa, Oklahoma, Muskogee, Oklahoma, Oklahoma City, Oklahoma, Fort Smith, Arkansas, Fayetteville, Arkansas, Bentonville, Arkansas, Rogers, Arkansas, Siloam Springs, Arkansas, Eureka Springs, Arkansas, Little Rock, Arkansas, Harrison, Arkansas, Branson, Missouri, Springfield, Missouri, Joplin, Missouri, Neosho, Missouri, Kansas City, Missouri, Jefferson City, Missouri, Columbia, Missouri, Wichita, Kansas, Kansas City, Kansas, Dallas, Texas, Fort Worth, Texas, Houston, Texas and the entire Central United States of America.

If your city is not listed, please rest assured that Harmon Concrete services all of Oklahoma, Texas, Missouri, Kansas and Arkansas.